User Manual | 28
-28-
[POE Monitoring] [Event Monitor]
HEALTH CHECK
Display the NVR’s system, network, camera, and HDD information as text. Select what information to
display and setup the check cycle time.
MENU
Open the main menu setup screen.
3.6
PTZ Operation
To operate a PTZ camera, the channel which is connected to a PTZ camera should be in full-screen
mode. To activate PTZ control, right-click and select “PTZ” in the pop-up menu. When in PTZ mode,
will appear on the right-button corner of the screen.
PTZ Control
In PTZ mode, the user can control the PTZ camera using the
USB mouse. While pressing the left button, drag the mouse
cursor up/down or left/rightward to move the camera’s
pan/tilt position. The further away from the center the
mouse’s cursor moves, the faster the PTZ camera will move.
To move the camera to a preset position, click the preset
position number at the bottom of the screen to move the
camera accordingly. The presets must be set before selection.
