Digital Watchdog DW-VP1212T8P User Manual Download

Page: 11 / 86

User Manual | 10

-10-

The Toolbar in Playback Mode

In the Playback view, move the mouse cursor to the bottom of the screen to show the menu bar.

Channel

Indicates the currently selected channel.

Intelligent Search Bar

Shows recording status for the selected channel from 00:00 to 24:00. A white-vertical line indicates

the time currently displayed. Moving the white-vertical line will update the video.

Previous/Next Date Search

Users can move to the previous date or the next date to search.

Playback Controls

: Playback speed control. (x32 / x16 / x8 / x4 / x2).

: Move backward one frame

: Stop button
: Play button

: Move forward one frame

: Playback speed control. (x2 / x4 / x8 / x16 / x32)

: Current playback speed

Screen Display Mode

Select the display split mode from the available options. Select 1CH, 4CH, 9CH or 16CH mode.

Backup

Backup recorded video to an external device. See “0 Backup” for details.

Playback

Switch to playback mode. See “3.7 Playback Recorded Image” for details.

Exit

Close playback mode and move to live mode.

When selected, the NVR’s menu bar remains on the screen permanently.

Summary of Contents for DW-VP1212T8P























































































Search results

Summary of Contents for DW-VP1212T8P

Reviews:

Related manuals for DW-VP1212T8P

Brands by name

Popular brands

Digital Watchdog DW-VP1212T8P, User Manual

Search results

Summary of Contents for DW-VP1212T8P

Reviews:

Related manuals for DW-VP1212T8P

Brands by name

Popular brands