Digital Watchdog DW-VP1212T8P User Manual Download

Page: 27 / 86

User Manual | 26

-26-

control a specific channel, put the mouse cursor on that channel and then

click the right button.

DISPLAY MODE

Change the screen display mode from the available split options.

CHANGE NEXT CH

View the next channel or next group of cameras in the current split

mode.

SEQUENCE
When “SEQUENCE” is selected,

icon will appear on the right-

bottom corner of the screen. The display screen will be sequentially

changed.

DIGITAL ZOOM

•

Digital Zoom is available in a single-channel view only. When
“ZOOM” is selected,

icon will appear on the right-button

corner of the screen and digital zoom control is available.

•

To zoom in, drag the mouse’s cursor on the desired area to

create a zoom square. You can also control zoom-in & zoom-

out by mouse scrolling the mouse’s wheel up and down. Once

the image is zoomed in, the user can move the zoom area by clicking on the edge of the

square and dragging it.

•

To exit from the zoom mode, click the right and select “ZOOM EXIT’ on the menu.

IMAGE ADJUSTMENT

View the adjusted camera image menu (Please refer to “4.2.1 Camera”). Users can adjust images

such as brightness, contrast, color, etc. The available options depend on the camera’s ONVIF

integration. See the camera’s manual for more information.

PTZ

Enable PTZ mode. (Please refer to “3.6 PTZ Operation” for detail.) The available PTZ options

depend on the camera’s ONVIF integration. See the camera’s manual for more information.

CAMERA SETUP

View the setup camera menu. (Please refer to “3.4.1 Setup for each camera”)

Users can setup resolution, frame, etc. The available options depend on the camera’s ONVIF

integration. See the camera’s manual for more information.

FREEZE

Freeze the current live view. The system clock (date/time information) will continue running at the

bottom of the screen. Select “FREEZE” again to resume the live view.

ADD BOOKMARK

Add a bookmark with a description of the currently displayed image.

Enter a description and click OK to save.

INSTANT PLAYBACK

Select from the time options (1 second to 5 minutes) to instantly switch to playback mode.

Search recorded video using the calendar, date/time, first and last data, system log, event log,

transaction verification and bookmarks. (Please refer to “3.6. Search Recorded Image” for details.)

SMART SEARCH

Summary of Contents for DW-VP1212T8P























































































Search results

Summary of Contents for DW-VP1212T8P

Reviews:

Related manuals for DW-VP1212T8P

Brands by name

Popular brands

Digital Watchdog DW-VP1212T8P, User Manual

Search results

Summary of Contents for DW-VP1212T8P

Reviews:

Related manuals for DW-VP1212T8P

Brands by name

Popular brands