9
um-dve10vr2 (g) 4/17
SYSTEM SET-UP
SYSTEM REQUIREMENTS
The system the dve10vr2 is connected to must have the following capability:
• Computer setting with a minimum resolution of 640 x 480 pixels, and
• if optional Touch screen display is ordered, an available COm or usb port for connec-
tion is required, depending on the display configuration ordered.
ShIPPING boX
The dve10vr2 is shipped in custom packaging. The installer should save the box and
all packaging materials in case the display would need to be returned to the dse service
Center.
LoNG-TERM SToRAGE
• For long-term storage, display should be stored in an ambient indoor environment
• display screen be protected from accidental damage
• For pedestal mount, disconnect cable(s) and loosen arm adjustment to where ball can
be removed from arm, or
• For Flush or panel mount, cover display with a protective covering that will not scratch
or transfer dyes to display screen.
PRoDUCT CARE AND MAINTENANCE (CoNTINUED)
MAINTENANCE
oThER MAINTENANCE
Only dse qualified service personnel should perform other maintenance aside from clean-
ing and power Cable replacement described within.
WARNING! pOWER CAbLE
To avoid shock and fire hazards, replace the display’s power cable if:
• insulation becomes damaged, or
• a loose connection is suspected.
WARNING! ShOCk hAzARD
To avoid risk of electrical shock, do not disassemble display’s enclosure.
There are no user-serviceable parts in the display. user maintenance is restrict-
ed to cleaning or power cable replacement as explained. disassembling
the display voids the warranty.
