7
um-dve10vr2 (g) 4/17
ELECTRICAL SAFETY
SERVICING
USER
• user servicing is limited to cleaning the display and screen
• do not disassemble or modify the display to avoid the possibility of electrical shock,
damage to its electrical components or scratching the display surface, and
• disassembly voids the warranty.
should a product be retired, dispose responsibly through a technology electronic (e-waste)
recycler.
DSE
dse qualified service personnel may be required to service the display if:
• does not operate normally when installation instructions are followed
• does not operate normally when operating instructions are followed
• Has been dropped or damaged, or
• exhibits a distinct change in performance, indicating a need for service.
ShIPPING To A DSE SERVICE CENTER
if display should need to be shipped to the dse service Center, the original packing material
or similar should be used to ensure safety of display in shipping. repack display as it was
originally received. protect the display screen.
ELECTRICAL
INSTALLING CAbLES
• pre and post installation, verify display’s power input connector is securely seated
• install power cable so as not to come in contact with hot surfaces
• do not allow anything to rest on power cable, and
• protect power cable from extreme heat sources.
PowER SoURCE
• always connect to a properly grounded dC (standard) power source
• any equipment to which display is attached must also be connected to properly wired
and grounded power sources
• Operational voltage is 10 - 36 vdC (input is 12, 24, 28 vdC nominal), and
• power Consumption is: 30 watts maximum.
WARNING! pOWER CONSuMpTION
DVE10VR2 is listed at 30 Watts maximum.
