14
um-dve10vr2 (g) 4/17
DISPLAY CoNNECToRS (CoNTINUED)
VGA-V1
37 pin pLUG
MiL-DTL-38999 SeRieS i
A1J7
PIN
SIGNAL
18
RED
19
RED-GND
17
GREEN
30
GRN-GND
16
BLUE
29
BLU-GND
15
HSYNC
14
VSYNC
27
SYN-GND
10
NO CONNECT
11
NO CONNECT
28
GROUND
13
NO CONNECT
3
TOUCH RXD
4
TOUCH TXD
2
GROUND
6
BUTTON RXD
7
BUTTON TXD
5
GROUND
AMPH
10-565999-271N
MATE
MS27467E15B35S
STRAIN
M85049/49-2-14W
TAbLE 4
VGA-V1 CoNNECToR (A1J7)
The military grade sealed vga-v1 Connector (Figure
6, #3) allows for interfacing with a pC. (second serial
Touch connection.) see Table 4.
Note: if USB Touch was ordered, it is only available
from this connector.
• Connector is hermetically sealed
• end-user supplies cable
• Line up with a1j7 connector
• add a turn to lock.
VIDEo IN CoNNECToR (A1J3)
The bNC Connector video iN (Figure 6, #5) allows for
input of an auxiliary composite video signal. This input
may be simultaneous with a sensor Camera system
video signal. see Table 5.
• bNC receptacle on display is sealed
• end-user supplies bNC coaxial video cable
• Line up with a1j3
• add a push/turn to lock.
ViDeo in
ViA BnC
A1J3
PIN
SIGNAL
CENTER
COAX CORE
SHELL
SHIELD BRAID
TAbLE 5
ViDeo oUT
ViA BnC
A1J6
PIN
SIGNAL
CENTER
COAX CORE
SHELL
SHIELD BRAID
TAbLE 6
VIDEo oUT CoNNECToR (A1J6)
The bNC Connector video OuT (Figure 6, #6) allows
for pass-though of sensor or auxiliary composite video
signal (a1j2, a1j3). see Table 6.
• bNC receptacle on display is sealed
• end-user supplies bNC coaxial video cable
• Line up with a1j6 connector
• add a push/turn to lock.
