Digital Projection Ltd. Titan Laser WUXGA
Using the projector
Power on / off
l
Auto Power Off
Set this to On if you want the projector to go into STANDBY mode when no input source is detected for
20 minutes.
l
Auto Power On
Set this to
On
if you want the projector to start up immediately when the mains is connected. Set this to
Off
if you want the projector to go into STANDBY mode when the mains is connected. In this case, the
projector will not start up until the
POWER
button is pressed on the control panel or the
ON
button is
pressed on the remote control.
l
Scheduled on/off
Access this submenu to create a weekly schedule for automatic on and off times:
1. Set a schedule:
l
Use the
UP
and
DOWN
arrow buttons to highlight a row, then press
ENTER/OK
to enable
edit mode.
l
Within a row, navigate with the
LEFT
and
RIGHT
arrow buttons. Set values with the
UP
and
DOWN
arrow buttons.
l
To exit edit mode, press
ENTER/OK
. Alternatively, press
EXIT
if you don’t want the
changes to take effect. Move to another row using the
UP
and
DOWN
arrow buttons.
2. To enable the schedule, set
Scheduleto
On.
Rev A January 2019
page 82
Operating Guide
Notes