Using the menus
Digital Projection Ltd. Titan Laser WUXGA
Editing projector settings
List of values
Some menu items may be
unavailable due to
settings in other menus.
Unavailable menu items
appear gray
If the highlighted menu item contains a list of values to choose from, you can change the value by doing the
following:
1. Highlight the menu item and press
ENTER/OK
.
2. In the list of values that opens, use the
UP
and
DOWN
arrow buttons to highlight a value, then press
ENTER/OK
again to select the highlighted value.
Using a slider to set a value
Slider
Some parameters open a slider. To set such a parameter:
1. Press the
LEFT
or
RIGHT
arrow button, or
ENTER/OK
. The arrow buttons will open the slider and adjust
the value at the same time.
ENTER/OK
will open the slider without altering the initial value.
2. Use the
LEFT
and
RIGHT
arrow buttons to move the slider.
3. When ready, press
EXIT
to exit the slider and return to the menu, or press
MENU
to exit the slider without showing the menu again.
Operating Guide
Rev A January 2019
page 43
Notes