Changing the lens
Digital Projection Ltd. Titan Laser WUXGA
Fitting a lens hood
1
2
FDA regulations requires
that a lens hood is
permanently fitted when
using the 4.16-6.96:1 lens
with the Titan Laser range
of projectors in the United
States of America. Fitting
can be provided by your
reseller or System
Integrator.
1. Remove the six screws.
1
2. Remove the lens glass.
3. Place hood over the lens, aligned with the screw holes.
4. Screw in the six screws to secure the hood.
2
3
5. Pace the six sponges over the locating pins on the
hood.
3
6. Place the glass and bracket over the hood.
4
7. Screw in the six screws to secure the glass and bracket
to the hood.
4
Installation & Quick Start Guide
Rev A January 2019
page 27
Notes