Digital Projection Ltd. Titan Laser WUXGA
Using the projector
Setup menu
Setup
High Altitude
Orientation
Screen Setting
Power On/Off Management
Clock Adjust
ColorMax Setting
Standby Mode
Blank Screen
Auto Source
Startup Logo
Auto
Auto-front
16:9
Normal
On
Off
Logo
PIC Mute Setting
Auto-front
automatically
detects the projector’s
position and sets Table or
Ceiling orientation
accordingly.
Screen Setting
and
Auto
Source
are not available
with input HDMI 3 or HDMI
4
l
Orientation
Choose from
Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling
and
Auto-front
.
l
High Altitude
Choose from
On, Auto
and
Quiet
.
l
Standby Power
Choose from
SuperECO
,
ECO
and
Normal
.
SuperECO
uses minimal power and disables power ON via LAN.
ECO
uses a low power setting but enables power ON via Ethernet port only.
Normal
enables power ON via both HDBase-T/LAN and Ethernet ports.
l
Screen Setting
Choose from
16:10, 16:9
and
4:3
.
l
ColorMax Setting
Set up user-defined color gamut values.
l
Power On/Off Management
Access the submenu to set up automatic projector power on and power off.
l
Clock Adjust
Access the submenu to set current date and local time.
l
Startup Logo
Choose from
Off
,
Original
and
User
.
Select original to display the Digital Projection Ltd. logo on startup. Select User to display a custom logo. Use the projector controller application to set the
custom logo for the User option.
l
Blank Screen
Choose from
Logo, Black, Blue
and
White
.
l
Auto Source
If this setting
is
On, the projector will automatically search for an active input source.
l
PIC Mute Setting
Access sub menu to set up the picture mute control.
Highlight the
DOWN
arrow at the bottom of the page and press
ENTER/OK
to navigate to the second Setup menu page.
Rev A January 2019
page 78
Operating Guide
Notes