Digital Projection
M-Vision LED+IR series
A TOUR OF THE MENUS
Operating Guide
Page Op_16
Rev D July 2014
Rear Projection
•
Set this to
On
to reverse the image from left to right, for use in Rear Projection Mode.
Ceiling Mode
•
Set this to
On
to reverse the image from top to bottom, for use in Ceiling Mode.
Source Enable
•
Press
ENTER/SELECT
to open the Source Enable sub-menu.
Use this to enable or disable any of the source inputs.
Altitude
•
When this is set to
Auto
, the internal fan will operate at
Low
speed, and rise to
High
speed automatically if the internal temperature rises.
•
When this is set to
High
, the fan will operate at
High
speed continuously, for use at high altitude locations.
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
When the
SCART
input is enabled,
the
Video
and
Component 1
inputs
will be disabled.
To use the
SCART
input, you
will need an adaptor. See the
Connection Guide
for more
information.
Advanced Menu
continued
