Digital Projection M-Vision LED+IR series Installation And Quick Start Manual Download Page 4

Page: 4 / 56

Digital Projection

M-Vision LED+IR series

ABOUT THIS GUIDE

Installation and Quick-Start Guide

Page Inst_1

Rev D July 2014

About this Guide

Please read this guide carefully before using the projector, and keep it handy for future reference.
A serial number is located on the side of the projector. Record it here:

Symbols used in this guide

Warnings

ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely

followed.

WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless

the instructions are closely followed.

Notes

NOTE: this symbol indicates that there is some important information that you should read.

Product revision

Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features

without prior notice. Projectors built prior to this revision of the Operating Guide may therefore not include all the features described.

Summary of Contents for M-Vision LED+IR series
























































Search results

Summary of Contents for M-Vision LED+IR series

Reviews:

Related manuals for M-Vision LED+IR series

Brands by name

Popular brands

Digital Projection M-Vision LED+IR series, Installation And Quick Start Manual

Search results

Summary of Contents for M-Vision LED+IR series

Reviews:

Related manuals for M-Vision LED+IR series

Brands by name

Popular brands