Digital Projection M-Vision LED+IR series Installation And Quick Start Manual Download Page 8

Page: 8 / 56

Digital Projection

M-Vision LED+IR series

POSITIONING THE SCREEN AND PROJECTOR

Installation and Quick-Start Guide

Page Inst_5

Rev D July 2014

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

Ensure that there is at least

30cm (12in) of space between the

ventilation outlets and any wall,

and 10cm (4in) on all other sides.

Do not stack more than 3

projectors.

Positioning the Screen and Projector

•

Install the screen, ensuring that it is in the best position for viewing by your audience.

•

Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that

the projector is level, and perpendicular to the sceen.

•

The dimension drawing below shows the positions of the feet for table mounting, and the fixing holes for ceiling mounting.

Summary of Contents for M-Vision LED+IR series
























































Search results

Summary of Contents for M-Vision LED+IR series

Reviews:

Related manuals for M-Vision LED+IR series

Brands by name

Popular brands

Digital Projection M-Vision LED+IR series, Installation And Quick Start Manual

Search results

Summary of Contents for M-Vision LED+IR series

Reviews:

Related manuals for M-Vision LED+IR series

Brands by name

Popular brands