Digital Projection
M-Vision LED+IR series
A TOUR OF THE MENUS
Operating Guide
Page Op_7
Rev D July 2014
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
To set what a ‘blank’ screen looks
like, use the
Blank Screen
setting
in the
System menu
.
Blank Screen
•
Set this to determine what appears on screen when the projector is searching for a valid input source.
Logo Display
•
Set this to determine whether the Digital Projection logo appears when the projector is switching from Stanby to On.
Auto-Source
•
When this is set to
On
, the projector will search for an alternative input source when the current input source is disconnected
•
When this is set to
Off
, the projector will show a ‘blank’ screen when the current input source is disconnected.
Test Patterns
•
Select from a range of test patterns.
•
Press
MENU
to return to the menu, or
ENTER/SELECT
to return to the currently selected input signal.
Blue Only
•
Set this to
On
to display only the blue component of the input signal, for calibration or test purposes.
General Menu
continued
