Digital Projection LIGHTNING 10sx, User Manual

Page: 88 / 151

✍
If a New computer signal is applied when the selected channel is configured for
computer and the computer signal does not identify a mode which matches, the
screen will display an image using default Size, Position, Number of Pixels, Pixel
Phase and Aspect Ratio. These default parameters will be supplied from ROM. A
message will also appear stating- "New Mode will be lost if not saved or if Channel
is changed".
The display will then have to be adjusted manually to give an optimum image.
These default parameters will be applied to the Revised Store. See Storing System
Configurations.
If SAVE is then pressed on the remote or “Save” is selected in the menu system and
there is insufficient memory to store a new mode, a message box will be overlaid
stating- "Cannot create Computer Mode due to insufficient Memory. Need to delete
an unwanted COMPUTER Entry from the library of Computer Cards. Go to ADD
COMPUTER Dialogue in Menu. (New Mode will be lost if Channel is Changed.)"
CÑ41
System Operation
Applying a new signal source
OPERATION
LBV00056; Revision A - 23/08/99