Digital Projection LIGHTNING 10sx, User Manual

Page: 73 / 151

SAVE AS
This command can save any changes made to the parameters. The SAVE AS screen
allows you to edit the mode name in order to save your changes as an additional
mode for the computer card. The window also displays the amount of user memory
available to store new modes.
If there is insufficient memory, a message box will appear upon entry to the SAVE
AS window stating - "Cannot create Computer Mode due to insufficient memory.
Need to delete a COMPUTER entry from the library of Computer Cards. Go to
ADD COMPUTER Dialogue in Menu. (New Mode will be lost if Channel is
Changed.). On pressing 'OK', the message box and Save As window will close and
you will return to the previous level in the menu system.
If the Card Data Set is in ROM (i.e. it is a factory preset) then the whole set will be
copied to non-volatile memory along with the New Mode. It will be saved with the
same name as the computer card but with an asterix (
*
) appended to distinguish it
from the factory preset version.
CÑ26
System Operation
OPERATION
LBV00056; Revision A - 23/08/99
D E L E T E M O D I F Y N E W C O P Y V I E W S E L E C T
K
- - -
- - -
O D E
5 0 0
C A N C E L
O K
S A V E A S
N / A
N / A
S A V E A S
A d d N e w M o d e t o t h i s
C o m p u t e r / G r a p h i c s C a r d
L i b r a r y .
M o d e N a m e - - - - - - - - -
1 0 0 % U s e r M e m o r y A v a i l a b l e
C A N C E L O K
e r