Digital Projection LIGHTNING 10sx, User Manual

Page: 54 / 151

The On Screen Display must be 'ON' to access the menu system, if the OSD is on
but no menus are being displayed, press the 'MENU' button. This will display either
the Main menu or the last screen of the menu system used (depending on whether
the menus have been used since the power or the On Screen Display was last turned
on). Menu operations are only active when the menu is being displayed on the
screen. The active menu or window is always the window in the foreground.
Menu displays can be temporarily removed, to view images etc., by pressing
'MENU'. If a data field is being edited, pressing 'MENU' will not turn off the menu
display, but will display a message box stating- "Cannot turn Menu display off
while Data is being edited. Press enter or EXIT to finish edit". When the 'MENU'
button is pressed again, you will be returned to the menu screen you last accessed so
you can continue editing or configuring the system.
To leave the menu system entirely, either press 'EXIT' at the main menu level or
'OSD OFF' at any time. This will lose access to the Service menu along with any
test pattern being displayed. When the menu system is re-entered, the entry point
will be the Main menu (top level).
Movement through the menu system is cursor controlled, the
ñ
and
ò
buttons can
be used to move up and down the page and the
ï
and
ð
buttons to move across the
page. If the cursor is moved off the edge of the page in any direction it will reappear
over the nearest function on the opposite side of the page.
To select a menu, press 'ENTER' when the cursor is over the required item. To
move up one menu level from a lower level press the 'EXIT' button when not
entering data. Alternatively, when a menu page offers a soft 'OK' or 'CANCEL'
button, move the cursor over one of these and press 'ENTER'. This will either
accept changes made (OK) while in the page or ignore changes (CANCEL) and
return to the higher level.
CÑ7
System Operation
Menu Operation
OPERATION
LBV00056; Revision A - 23/08/99