Digital Projection
HIGHlite Laser II 3D Series
Rev C April 2017
Page 18
Important Information
Removing the lens
Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens and lens hood fitted.
1. Loosen the four screws securing the lens
hood to the body of the projector.
Remove the lens hood.
2. Push down the lens holder tab.
3. Rotate the lens anti-clockwise.
4. Pull the lens forward to remove it from the
lens aperture.
