Digital Projection
HIGHlite Laser II 3D Series
Rev C April 2017
Page 21
Important Information
1
ON indicator (blue)
Behavior
Meaning
Off
The projector is switched off.
On
The projector is switched ON.
Flashing
The projector is warming up or cooling down.
2
ERROR indicator (red)
Behavior
Meaning
Flash once, then pause
Laser failure.
Flash twice, then pause
Cover open.
Flash three times, then pause
Fan failure.
Flash four times, then pause
Over temperature.
On
System
error.
3
STANDBY indicator (green)
Behavior
Meaning
On
The projector is in STANDBY mode.
4
MENU button
Access the projector OSD (on-screen display).
5
Navigation (arrow buttons and ENTER)
Navigate the OSD and edit settings with the arrows, confirm your choice with
ENTER
.
6
INPUT button
Select input source.
7
Focus IN / OUT
Adjust focus.
8
Zoom IN / OUT
Adjust zoom.
9
Shutter CLOSE / OPEN
Open and close the shutter.
10
POWER button
Switch the projector on and off (in STANDBY mode)
11
EXIT button
Close the OSD.
12
SHIFT button
Press and hold this button, then press the arrow buttons to move the lens.
