Digital Projection
HIGHlite Laser II 3D Series
Rev C April 2017
Page 17
Important Information
Inserting a new lens
Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens and lens hood fitted.
1. Insert the lens into the lens aperture, making sure that the plug on the zoom drive mechanism
lines up with socket on the right of the lens aperture.
2. Rotate the lens clockwise until it clicks into place.
3. Secure the lens hood to the front of the projector
with the screws.
