Digital Projection
HIGHlite Laser II 3D Series
Rev C April 2017
Page 14
Important Information
Connecting the power supply
Adjust the
VOLTAGE SELECT switch
1
to the required voltage, then firmly push the mains
connector into the
socket
2
.
Voltage selection
The VOLTAGE SELECT switch must be set to match the power supply you are using:
Voltage of power supply used
Position of VOLTAGE SELECT switch
AC110V outlet
AC200V (single phase) outlet
Use only the power cable provided.
Ensure that the power outlet includes a ground connection as this equipment MUST be
earthed.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power
cable.
AC MAINS
交流電源輸入
AC POWER
SWITCH
交流電源開關
200-240Vac
VOLTAGE SELECT
交流電壓選擇
110-130Vac
1
2
