Digital Projection
HIGHlite 730 & 740 Series
USING THE PROJECTOR
Operating Guide
58
Rev E March 2014
Edge Blend procedure (continued)
5.
Define blend regions.
From the
Edge Blend
menu on all projectors,
set
Blending
to
Align Pattern
.
Set up
Blend Width
on each projector so
that the align patterns overlap perfectly and
completely cover the blend regions
(Fig. 2)
.
If necessary, physically move the projectors
and/or use
Lens Shift
and
Zoom
again to
align the array perfectly
Fig. 2
1
Left projector
2
Align pattern of left projector
The red arrow next to the align pattern
shows what correction needs to be made
for the align pattern to cover the whole
blend region.
3
Blend region
The brighter ribbon in the middle is
overlap area not covered by the align
patterns.
4
Align pattern of right projector
The red arrow next to the align pattern
shows what correction needs to be made
for the align pattern to cover the whole
blend region.
5
Right projector
Fig. 1 Align patterns make it easy to see where the overlap is not perfect
Fig. 2 Projectors with align patterns not covering the blend region
2
1
4
5
3
Notes
