Digital Projection
HIGHlite 730 & 740 Series
CHANGING THE LENS
Installation and Quick-Start Guide
12
Rev E March 2014
Removing the lens
1. Remove the six
screws
1
securing the front cover to the body of
the projector.
2. Remove the
front cover
2
from the projector.
3. Push down the
lens holder tab
3
.
4. Rotate the lens anti-clockwise
5. Pull the lens forward to remove it from the lens aperture.
2
1
3
Notes
Before changing the lens,
always make sure the projector
is switched off and fully
disconnected from its power
supply.
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
When changing the lens, avoid
using excessive force as this may
damage the equipment.
Avoid touching the surface of the
lens as this may result in image
impairment.
Take care to preserve the original
lens packaging and protective caps
for future use.
