Digital Projection
HIGHlite 730 & 740 Series
USING THE PROJECTOR
Operating Guide
53
Rev E March 2014
Reduce Black Level Uplift Width (continued)
In the
Reduce Black Level Uplift
Width
menu, settings correspond
to coordinates within the unblended
regions. Only relevant coordinates
are enabled.
To remove the artifact on the left:
1. Open the
Reduce Black Level
Uplift Width
menu of the
projector on the left.
2. Adjust
Upper Right X
and
Lower Right X
.
3. Select
Apply Uplift
. The
black level uplift region of this
projector will withdraw from the
pond of mirrors of the other
projector and the artifact will
disappear.
To remove the artifact on the right,
•
Open the
Reduce Black
Level Uplift Width
menu
of the projector on the right
and adjust
Upper Left X
and
Lower Left X
, then select
Apply Uplift
.
Notes
Main Menu
Edge Blend
Reduce Black Level Uplift Width
To apply the
settings in this menu,
use the
Apply Uplift
command at
the bottom of the page.
For additional information, see
The
DMD™
in the
Reference Guide
.
For a detailed step-by-step
description of the edge blend
process, see
Blending images
from multiple projectors
further in
this section.
