Digital Projection
HIGHlite 730 & 740 Series
USING THE PROJECTOR
Operating Guide
31
Rev E March 2014
Using The Projector
Main menu
•
Input Selection
Select an input source from the drop-down list.
•
Test Pattern
Set
Input Selection
to
Test pattern
and then select a test pattern from the drop-down list.
•
Lens, Image
,
Color
and
Geometry
Open these sub-menus to access various picture and screen settings.
•
Edge Blend / PIP
PIP
and
Edge Blend
are mutually exclusive modes of operation. When the projector is in Edge
Blend mode (as shown in the picture), PIP is not available, and vice versa.
•
Lamps
Select lamp configuration and adjust lamp power.
•
Setup
Adjust Input Configuration, Network, On Screen Display and System settings.
•
Information
View your current configuration
Notes
Main Menu
You can also select an input source
by pressing the following buttons on
the remote control:
1 for VGA
2 for HDMI 1
3 for DVI 1
4 for 3G-SDI
5 for CVBS 1
6 for S-Video
7 for Component
8 for CVBS 2
Test patterns are subject to image
controls, so brightness, contrast
etc. will affect their appearance on
screen.
Do not use the provided test
patterns for ColorMax.
You can upload custom test patterns
using a network connection - see
Web Configuration Utility
.
See also
Using The Menus
earlier
in this guide and
Appendix D:
Menu Map
in the
Reference Guide
.
