DIGITAL-LOGIC AG
PCCP5 Manual V2.3
114
9 E
THERNET
LAN
9.1 Ethernet IO-Address and IRQ selection
The Ethernet interface is configured with the values stored in an EEPROM. The default values are:
Jumper
Configuration
J41
IOS0
J42
IOS1
J43
IOS2
Base
address
IRQ
BUS INTERFACE
0
closed
closed
closed
340
5
8
AUI/COAX
1
open
closed
closed
340
10
16
AUI/COAX
2
closed
open
closed
320
11
16
AUI/COAX
3
open
open
closed
300
2/9
8
AUI/COAX
4
closed
closed
open
340
5
8
10BASE-T
5
open
closed
open
340
10
16
10BASE-T
6
closed
open
open
320
11
16
10BASE-T
7
open
open
open
Software downloadable configuration
On the board, the default configuration and the selected configuration are labeled. The label also contains
the unique node address:
Label example:
NODE:
aabbccddeeff
TYPE: B
0
340
i5
8
AUI
1
340
i10
16
AUI
* 2
320
i11
16
AUI
3
300
i5
8
AUI
4
340
i5
8
10BASE-T
5
340
i10
16
10BASE-T
6
320
i11
16
10BASE-T
The asterisk * in front of the configuration 2 line marks the selected configuration. You can change the hard-
ware configuration by modifying the jumper IOS0 - IOS2.
The software downloaded configuration ise recommended only for custom cases, where the values must be
altered, without soldering the jumpers onboard. The downloaded configuration works only with Novell V3.11
and Novell Lite and all other ODI driver NOS.
For OS/2, NT and UNIX applications always use the hardware configuration, because the drivers are
adapted only for hardware configuration schemes.
