Digital Equipment STARION 20 Series, Service Maintenance Manual

Page: 38 / 92

Service Procedures Digital STARION 9xx & 20xx PC
38 MCS Logistics Engineering - Nijmegen
Expansion Slots
The Starion riser card contains six slots for installing:
♦
Three ISA expansion boards and two PCI expansion boards or
♦
Four ISA expansion board and one PCI expansion boards (refer to the table).
The computer automatically assigns the necessary resources to any installed Plug and Play-compatible
expansion board so it operates at maximum performance. When planning on installing non-Plug and Play
expansion boards, it may be necessary to manually set jumpers on the board based on the computer
resources already allocated.
Expansion Slot Types & Locations
Expansion
Slot Type Description
J1
ISA Supports half-length industry-standard 16-bit ISA expansion
boards
J2 and J3 ISA Supports full-length industry-standard 16-bit ISA expansion
boards
J4 ISA Supports full-length industry-standard 16-bit ISA expansion
boards Designated as a shared slot with PCI slot J5
(1)
J5 PCI Supports full-length 32-bit PCI local bus expansion
boardsDesignated as a shared slot with ISA slot J4
(1)
J6 PCI Supports full-length 32-bit PCI local bus expansion boards
(1)
Only one expansion board can reside in slot J5 and J4 at any one time. These slots have to share the slot opening at the
rear
panel