Digital Equipment STARION 20 Series, Service Maintenance Manual

Page: 29 / 92

Digital STARION 9xx & 20xx PC Utilities & Configuration
MCS Logistics Engineering - Nijmegen 29
S
T
A
R
I
O
N
9
x
x
-
2
0
x
x
Advanced Chipset Control
CAUTION
The following advanced chipset control options should normally stay at their default
values. Change them only if necessary to correct specific operating problems or errors.
Menu Fields Settings Comments
PCI Slot 1
Latency
Timer Default(40h)
08h - F8h Select Default or a value from 08h to F8h to set the PCI device’s
latency timer. Default uses the PCI device’s power on setting
PCI Slot 2
Latency
Timer
Default(40h)
08h - F8h Select Default or a value from 08h to F8h to set the PCI device’s
latency timer. Default uses the PCI device’s power on setting
VGA palette
snoop Enabled
Disabled
Default This option controls how VGA devices handle accesses to their palette
areas. Enabling this option causes special palette behavior (a device
must not respond to normal accesses). Disabling this option causes a
device to treat palette accesses like any other device access. Enable
VGA Palette Snoop when a second video adapter is connected to the
feature connector of the installed VGA adapter for multi-media
devices.
Monitor Auto
Color
Monochrome Sets the monitor type. Auto automatically detects the monitor type. If
Auto fails to correctly detect the monitor type, select Color or
Monochrome as appropriate.
VGA Feature
connector
Enabled Use with VGA add-in cards to inform card not to claim VGA palette
writes.
Disabled Use to inform VGA add-in cards to claim VGA palette writes.
Onboard VGA
IRQ Enabled
Disabled Select Enabled if the application requires VGA IRQ.
Security Options
Menu Fields Settings Comments
Supervisor
password is Not user
selectable
(Disabled) Indicates whether or not the supervisor's password is enabled or
disabled.
User password
is Not user
selectable
(Disabled) Indicates whether or not the user's password is enabled or disabled.
Set supervisor
password Press [Enter] Allows a supervisor password to be set. The supervisor password must
be set if a user password is to be used.
When the supervisor later enters his or her password, all user
selectable features are accessible.