1
Troubleshooting and Diagnosing
Problems
This chapter describes the troubleshooting procedures and diagnostic commands
that you can use to solve basic problems with the MicroVAX 3100 Model 85,
Model 95, and Model 96 systems. It contains information on the following:
•
Troubleshooting
•
Diagnostic tests and commands
•
Contacting Digital™ services
It also lists the information that you must give to your Digital services
representative and where to find this information.
1.1 Troubleshooting
If a problem occurs, you must first make sure that all the cables, loopback
connectors, and terminators are correctly connected and that the connectors are
not damaged, for example, the pins may be broken or short-circuited.
Follow these steps:
1.
Shut down the operating system by following the procedures described in the
operating system documentation.
2.
Turn off the console terminal and all the peripheral devices, such as printers
and modems.
3.
Turn off all the expansion boxes.
4.
Turn off the system unit.
5.
Check that the following cables, if installed, are correctly connected at both
ends and that the connectors are not damaged:
•
Console terminal cable (linking the console terminal to the system unit)
•
Console terminal power cord
Troubleshooting and Diagnosing Problems 1–1
