manualshive.com logo in svg

Digital Equipment LSR 2000, Service Manual

Share
Download
Digital Equipment LSR 2000 Service Manual Download Page 35

 

2: Using the Control Panels

Colorwriter LSR 2000 Printer
Service Guide

 

2-7

 

 

•

 

For cassette and manual feeding tray side registration adjustment

 

—

pressing the + or - key adjusts the edge registration value by 
0.425mm.

 

5. Press the ENTER key for each adjustment option to save 

changes.

 

The density gauge LED stops flashing to indicate the new value 
has been saved.
When the printer is turned ON, or the density adjustment 
panel is not operated for more than 30 seconds, it will enter the 
OFF mode. In OFF mode, the COLOR SELECT LEDs will go 
OFF, and only the density gauge DEFAULT LED (middle) will 
light up if all adjustment values are at the ROM default value. 
Otherwise all will go OFF.
Press only the + and - keys for at least five seconds to initialize all 
adjustment values as default and the panel will enter the OFF 
state.

 

Using the printer control panel

 

The printer control panel on the front of the printer enables you to 
set options and view information about print jobs, in addition to 
displaying status information about the printer. It is comprised of 
the following parts:

•

Activity lights that indicate printer status

•

Display window showing status information and options for 
setting up the printer

•

Buttons

Online

Cancel

Menu

Enter

Processing

Multipurpose Tray

Main Cassette
Optional Cassette

Fault

LCD

READY     212 MB
Colorwriter LSR

Down

Up

Next

Previous

Summary of Contents for LSR 2000












































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands