2: Using the Control Panels
2-4
Colorwriter LSR 2000 Printer
Service Guide
To change the test pattern
1. Press the ENTER key eight times while holding down the COLOR
SELECT key.
All color indicator LEDs will flash to indicate the shift to the
test pattern setting mode (see Figure 2-3 below).
Figure 2-3
Test pattern setting mode
2. Press the + and - keys to select a test pattern. See Figure 2-4
below for the correspondence between the density gauge LEDs
and the test patterns available.
If you select a test pattern different from the one currently
selected, the density gauge LED for the selected pattern will
flash.
Figure 2-4
Density gauge LEDs for test patterns
3. Press the ENTER key to save the changes.
The LED stops flashing to indicate that the new test pattern has
been saved.
M
C
Y
Bk
COLOR
SELECT
DEFAULT
ENTER
TEST
Solid color
Solid white
Gradation
Horizontal lines
Vertical lines
Grid
(default)
