Digital Equipment EK-SFXXS-SG-003, Service Manual

Page: 74 / 224

5–8 SF3x Storage Enclosure FRU Replacement
Example 5–3 SET HOST/DUP
$ SET HOST/DUP/SERVER=MSCP$DUP/TASK=PARAMS R2CYAA
%HSCPAD-I-LOCPROGEXE, Local program executing - type ^\ to exit
Copyright (C) 1990 Digital Equipment Corporation
PARAMS> SHOW NODENAME
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
NODENAME R2CYAA RF35 String Ascii B
PARAMS> SHOW SYSTEMID
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
SYSTEMID 0404194100302 0000000000000 Quadword Hex B
PARAMS> SHOW ALLCLASS
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
ALLCLASS 1 0 Byte Dec B
PARAMS> SHOW FIVEDIME
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
FIVEDIME 1 1 Boolean 0/1 B
PARAMS> SHOW UNITNUM
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
UNITNUM 21 0 Word Dec U
PARAMS> SHOW FORCEUNI
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
FORCEUNI 0 1 Boolean 0/1 U
PARAMS> EXIT
$
3. If you cannot establish a connection to the disk ISE, you can use
the DCL command ANALYZE/SYSTEM (Example 5–4) to obtain the
parameter information. Refer to the example ( ) where the system
ID is 404194100302.