Digital Equipment EK-SFXXS-SG-003, Service Manual

Page: 130 / 224

6–22 SF7x Storage Enclosure FRU Replacement
Example 6–5 PARAMS Dialog Restoring Disk ISE Parameters
$ SET HOST/DUP/SERVER=MSCP$DUP/TASK=PARAMS R2QSAA
%HSCPAD-I-LOCPROGEXE, Local program executing - type ^\ to exit
Copyright (C) 1990 Digital Equipment Corporation
PARAMS> SHOW NODENAME
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
NODENAME R2QSAA RF72 String Ascii B
PARAMS> SET NODENAME R2CYAA
PARAMS> SHOW SYSTEMID
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
SYSTEMID 593200495860 0000000000000 Quadword Hex B
PARAMS> SET SYSTEMID 0404194100302
PARAMS> SHOW ALLCLASS
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
ALLCLASS 0 0 Byte Dec B
PARAMS> SET ALLCLASS 1
PARAMS> SHOW FIVEDIME
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
FIVEDIME 1 1 Boolean 0/1 B
PARAMS> SHOW UNITNUM
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
UNITNUM 0 0 Word Dec U
PARAMS> SET UNITNUM 21
PARAMS> SHOW FORCEUNI
Parameter Current Default Type Radix
--------- ---------------- ----------------- --------- -----
FORCEUNI 1 1 Boolean 0/1 U
PARAMS> SET FORCEUNI 0
NOTE: Check the correct parameter settings before writing. Use the SHOW command.
PARAMS> WRITE
Example 6–5 Cont’d on next page