Chapter 6: Local Management: Module Navigation
6-64
DLE49-MA User’s Guide
Table 6-2
TX Queue Mapping Default Values
To set the TX Mapping Queues, refer to
Section 6.22.1
.
RX Priority (Read-Only)
Lists the eight priorities, 0 through 7.
TX Priority (Selectable)
Enables the frames with a certain RX priority to be changed to transmit
according to a different TX priority (0 through 7). For example, all frames
with an RX priority of 3 could be regenerated with a TX priority of 5.
The regenerated priority is used to determine the correct queue as defined
in the Priority/Queue Mapping. The default values for the TX Priority
settings are listed in
Table 6-3
according to RX priority.
Table 6-3
TX Priority Regeneration Default Values
To set the RX Regeneration Priorities, refer to Section 6.22.2.
Default Priority [n] (Selectable)
Used to set the Default Priority (0 through 7) of the port selected in the
Port command. To set the default priority, refer to
Section 6.22.3
.
PORT (Modifiable)
Used to enter the number of the port to which the settings in this screen
apply. The port number is entered in numerically. To view the settings for
the desired port press the ENTER or arrow key to refresh the screen.
Priority
0
1
2
3
4
5
6
7
TX Queue
1
0
0
1
2
2
3
3
RX Priority
0
1
2
3
4
5
6
7
TX Priority
0
1
2
3
4
5
6
7
