FLASH Download Configuration Screen
DLE49-MA User’s Guide
6-31
TFTP Gateway IP Addr (Modifiable)
Shows the IP address of the TFTP gateway server defined on the General
Configuration screen in
Section 6.5.4
.
Download Server IP (Selectable)
Is used to select the IP address of the TFTP server to be used for the
FLASH download.
Download File Name (Selectable)
Is used to select the complete TFTP Server path and file name of the new
image.
Last Image Server IP (Read-Only)
Shows the IP address of the server used for the previous FLASH
Download.
Last Image File Name (Read-Only)
Shows the complete path and file name of the last image downloaded to
FLASH.
Download Status (Read-Only)
Provides the status of the current or most recently completed download.
6.9.1
Image File Download Using Runtime
To download a firmware image of FLASH to the DLE49-MA using
Runtime, proceed as follows:
1.
Use the arrow keys to highlight the Reboot After Download field.
2.
Use the SPACE bar to select either YES or NO. Select YES if you
want the device to reboot after the download is completed. Select NO
if you want the device to store the new image in FLASH memory until
the device is reset or during the next power up.
3.
Use the arrow keys to highlight the TFTP Gateway IP Addr field.
4.
Set the IP address of the TFTP gateway server (this defaults to the
same IP address as that set in the TFTP Gateway IP Addr field on the
General Configuration screen).
5.
Use the arrow keys to highlight the Download Server IP field.