General Configuration Screen
DLE49-MA User’s Guide
6-21
Figure 6-8
Clear NVRAM Warning Screen
5.
Use the arrow keys to highlight YES and press ENTER. The message
“CLEARING NVRAM. REBOOT IN PROGRESS...” displays. The
DLE49-MA clears NVRAM and reboot. All user-entered parameters
default to factory settings.
6.5.13
Enabling/Disabling IP Fragmentation
To enable or disable IP fragmentation, proceed as follows:
1.
Use the arrow keys to highlight the IP Fragmentation field.
2.
Press the SPACE bar to choose either ENABLED or DISABLED.
3.
Use the arrow keys to highlight the SAVE command.
!
If the DLE49-MA is being bridged to an FDDI ring, IP
Fragmentation should be enabled. If IP Fragmentation is
disabled, all FDDI frames that exceed the maximum Ethernet
frame size will be discarded.
WARNING
174251
YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEAR
ALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TO
IP ADDRESS, INTERFACE CONFIGURATION, AND COM PORT
CONFIGURATION, THEN RESET THE BOARD.
ARE YOU SURE YOU WANT TO CLEAR NVRAM?
YES
NO