Digital Equipment Digital EtherWORKS 3 Turbo, User Information

Page: 48 / 66

PATHWORKS Native Datalink Installation
To install the DLLEWRK3.EXE file, use the following procedure:
1. Enter NICSETUP to change the
Turbo
board configuration from
2K mode (the default) to 32K or 64K mode.
2. If you are using an Extended Memory Manager, ensure that the
board memory range is excluded (for example, x=D000-D7FF).
3. For users of PATHWORKS version 4.1 or earlier, run NETSETUP
to automate the Native Datalink driver installation. Select the
EtherWORKS Native Datalink as the Ethernet adapter type.
4. After NETSETUP completes, change the
%BOOT%\dlldepca.exe
line in STARTNET.BAT to
%BOOT%\decnet\dllewrk3.exe
.
5. Once this change is complete, copy the DLLEWRK3.EXE driver
from the distribution diskette \PATHWRKS directory to the
\DECNET directory on your hard drive.
6. For users of PATHWORKS version 5.0 or later, select the
EtherWORKS 3 Native Datalink menu option during NETSETUP
to automate the installation.
Note
Unlike the Native Datalink driver for earlier EtherWORKS
products, DLLEWRK3 does not require changing the command
line. If you need to alter the Turbo board configuration
parameters, execute the NICSETUP utility included on the
board distribution diskette. When the DLLEWRK3 driver
is invoked, it will automatically read the board’s internal
settings.
4–8