Digital Equipment Digital EtherWORKS 3 Turbo, User Information

Page: 28 / 66

Figure 2–6 Hardstrap Jumpers
LJ-02796-TI0
W
2
W
1
1
Once a hardstrap override resolves the system conflict, you can
continue setting up the Turbo board, as described in Chapter 3.
To resolve bus conflicts:
1. Turn off the PC power.
2. Hardstrap the board by inserting one or both W1 and W2 jumpers
on the
Turbo
board.
3. Turn on the PC power and run NICSETUP to change the board
setup to resolve the conflict.
4. Select the Save Setup option to ensure that you save the setup
parameters.
2–12