6.4 Software Error Messages
Many software errors can be corrected by adding additional memory,
reassigning memory, or by selecting the proper interface parameter.
Table 6–3 describes the corrective action to take when a software error
occurs.
Table 6–3: Software Error Messages
Message
Meaning
Corrective Action
20 PAGE FULL
The page buffer is over-
flowing with data.
Clear fonts from memory after each
job.
Assign one or two full-page bitmap
areas in memory to handle the complex
data (see Section 4.5.5.3).
Add additional RAM.
21 COMPLEX DATA
There is complicated
print data that the
printer cannot handle.
Assign one or two full-page bitmap
areas in memory to handle the complex
data (see Section 4.5.5.3).
22 LINE ERROR
The receiving buffer is
overflowing with data.
Enable a handshaking protocol to
regulate data flow (see Section 4.5.6.4,
Section 4.5.6.5, and Section 4.5.6.6).
Ensure that the host, the printer, and
any other devices that are connected
(such as print servers) all have the
same type of handshaking protocol
enabled.
23 MEMORY FULL
Memory cannot accept
additional downline load-
ing of fonts into memory.
Clear fonts from memory after each
job.
Reallocate less bitmap page memory
space (Section 4.5.5.3).
Add additional RAM.
24 FULLPAINT REJ
Full paint mode is not
allowed due to lack of
memory space.
Clear fonts from memory after each
job.
Add additional RAM.
26 MEMORY FULL
RAM space is full.
Clear fonts from memory after each
job.
Add additional RAM.
Troubleshooting
6–5
Summary of Contents for DEClaser 2200
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5...
