Table 3–2 (Cont.): Keypad Functions: Keypad Mode
Key
Function
Test/Font
Test/Font
performs several functions in Keypad Mode:
•
Pressing the key once prints Test Print A (see
Section 2.13).
•
Pressing and holding the key down for at least three
seconds prints Test Print B (see Section 2.14).
•
Pressing the key twice prints the Font List (see
Section 2.15).
Reset
Pressing
Reset
performs a soft reset by clearing the data
in the print buffer and returning the printer to the ready
state. The printer operates with the settings currently
stored in RAM, which are loaded into operating memory
when a reset is performed.
You can also use
Reset
to exit Control Representation
Mode (see Section 2.16).
Menu
Places the printer in Menu Mode and displays the first
menu: FONT/FEED LAYOUT.
Refer to Section 4.1 for more information about Menu
Mode.
Duplex
Pressing
Duplex
alternates between simplex mode (one-
sided printing) and duplex mode (two-sided printing). If
the printer ‘‘beeps’’ when you press
Duplex
, check to be
sure that the printout selector is in the duplex position (see
Table 1–2), and that the printer is not set in the manual
feed mode of operation (see Section 4.5.1).
3–6
DEClaser 2200 Printer Operator’s Guide
Summary of Contents for DEClaser 2200
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5...
