4.5.6.6 End of Text/Acknowledge (etx/ack)
The end of text/acknowledge (etx/ack) feature is used with another type
of handshaking protocol on some systems to prevent data overflow. The
etx/ack feature also uses software to regulate the flow of data to the input
buffer by exchanging signals with the host computer. It is recommended
that this feature be enabled by systems that support etx/ack to prevent the
loss of data.
NOTE:
The etx/ack feature is not supported on Digital systems. Use xon/
xoff if you have a Digital system.
4.5.7 DUPLEX Menu
The DUPLEX menu determines whether paper is printed on one or two
sides. The duplex printing mode can be selected under software control from
the host, or by using
Duplex
on the control panel. Duplex mode is indicated
when the Duplex indicator is on. See Table 3–2 for more information about
using
Duplex
.
NOTE:
Duplex mode cannot be selected if the printer is in the manual feed
mode of operation, or if the printout selector is set to the faceup position.
Table 4–17 shows the features and values of the DUPLEX menu.
Table 4–17: DUPLEX Menu Features and Values
Feature
Values
Description
duplex
OFF
1
Selects the simplex mode of operation. Paper is
printed on one side in simplex mode.
ON
Selects the duplex mode of operation.
Paper
is printed on two sides in duplex mode and
delivered to the top output tray.
1
Factory default setting.
Printer Configuration
4–31
Summary of Contents for DEClaser 2200
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5...
