The following command line contains instructions to print on legal-size
paper in manual feed mode. This example is set up to print a file on an
8 ½" x 14" sheet of paper in portrait mode using manual feed. Table 2–1
describes each escape sequence in the example.
<ESC>[7I <ESC>[99;2;2500;4200 { <ESC>[8J <ESC>[99!v
Table 2–1: Legal-Size Coding Example
Escape Sequence
Name of Command
Description
<ESC>[7I
SSU (Size Select Unit)
Units can be pixels, deci-
points, or centipoints. This
example uses pixels.
<ESC>[99;2;2500;4200 {
DECSS (Set Sheet Size)
Defines manual feed input
and the width (2500 pixels
= 8 ½") and length (4200
pixels = 14") of the paper.
<ESC>[8J
PFS (Page Format Select)
Selects portrait mode of print-
ing and sets the margins for
the larger size paper.
<ESC>[99!v
DECASFC
(Automatic Sheet Feeder
Control)
Selects the manual feed
mode of operation.
NOTE: Manual feed mode
can also be selected from the
FEEDER Menu, or from the
control panel using
Feeder Select.
See Appendix A for additional programming information.
For detailed
information about sending commands from the host computer, consult
the Digital ANSI-Compliant Printing Protocol Level 3 Programming
Reference Manual and the Digital ANSI-Compliant Printing Protocol Level
3 Programming Supplement.
Section 2.9.1 describes how to feed media using
Feeder Select
on the control
panel to invoke the manual feed mode. See Chapter 4 for information
about setting the manual feed value from the FEEDER menu.
Operating Information
2–19
Summary of Contents for DEClaser 2200
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5...
