Digital Dream DDCS V3.1, User Manual

Page: 73 / 84

Digital Dream Standalone Motion Controller DDCS V3.1 DDCS V3.1 Users Manual Page -72
A) #2：Display response during working.This time is for analysing the file.When the file size is big,just set a higher time
value,and also don’t display the toolpath,save the time and memory for the file analysing;
#250 is for the same reason.If file too big,set it to “disable”.
B) #115：No matter in Metric Units or Imperial Units,the pulse equivalent is based on Metric Unit,so F value is always
based on Metric Unit(mm);
C) #238: IO input filter time width.It for the external E-stop signal,Homing signal ,limited signal and MPG reset signal,-
to avoid the noise and interference,set a filter time width;
D）#253: Mode of draw tool road: As for the plane line, such as the PCB engraving or the color plates lettering, please
adopt the line pattern. As for the plane embossment, please adopt the statue pattern.
E）#495：The value is smaller,the processing will be more smoothy,but longer working time; The value is bigger,the
working time is shorter,but if the time is too short that will a hit for machine.
16 ) System Setting（Totally 12 Items）
0: Statue Mode; 1: Line Mode
0: No; 1: Yes
0: disable; 1：enable
If just normal size the value 400 is
ok;but if very tiny lines with big file
set the value is 4000.
Display response
during working
#1 Language setting 1 BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
0~2 0：Eng； 1：中国； 2：Русский
#2 400-10000
#250 Real track paint enable
4000
s
#238 IO input filter time width 10 ms 0.001-9999.999
#218 Cycle Start key mode selection 0：Pause start；1：Restart
1
#115 Coordinate unit selection 0
0 0：mm；1：inch
#114 Jog support in continuous mode 2 0：Mode 1；1：Disable；2：Mode 2
#88 Enable of beep 1 0: Disable; 1:Enable
#3 Function of tool path key 0 0/1
0/1
0/1
0/1
0/1
0/1
0/1
0：tool path； 1：Try cutting
#253 Track paint mode 0 BOOL
BOOL
1/0
s #495
#2029 Interpolation period 0.005 0.002-0.010
color reversal 0
Para.
Mark
Parameter definition
Default
value
Default
Unit
Param
Scope
Notes
-999.999 ~ 999.999
This D group is for
Tool Radius Compensation
#283 D00 Tool Offset
D01 Tool Offset
D02 Tool Offset
D03 Tool Offset
D04 Tool Offset
D05 Tool Offset
D06 Tool Offset
D07 Tool Offset
D08 Tool Offset
D09 Tool Offset
D10 Tool Offset
D11 Tool Offset
D12 Tool Offset
D13 Tool Offset
D14 Tool Offset 0.000 BOOL
-999.999 ~ 999.999 #284 0.000 BOOL
-999.999 ~ 999.999 #285 0.000 BOOL
-999.999 ~ 999.999 #286 0.000 BOOL
-999.999 ~ 999.999 #287 0.000 BOOL
-999.999 ~ 999.999 #288 0.000 BOOL
-999.999 ~ 999.999 #289 0.000 BOOL
-999.999 ~ 999.999 #290 0.000 BOOL
-999.999 ~ 999.999 #291 0.000 BOOL
-999.999 ~ 999.999 #292 0.000 BOOL
-999.999 ~ 999.999 #293 0.000 BOOL
-999.999 ~ 999.999 #294 0.000 BOOL
-999.999 ~ 999.999 #295 0.000 BOOL
-999.999 ~ 999.999 #296 0.000 BOOL
-999.999 ~ 999.999 #297 0.000 BOOL
D15 Tool Offset -999.999 ~ 999.999 #297 0.000 BOOL
Para.
Mark
Parameter definition
Default
value
Param
Scope
Param
Unit
Notes