manualshive.com logo in svg

Digital Alert Systems DASDEC II, User Manual

Share
Download
Digital Alert Systems DASDEC II User Manual Download Page 150

 

 144   

 

Digital Alert Systems: DASDEC User Manual

   

7 Server 

The Server pages present all kinds of system status information. There are three choices on the Server page: 

Help, 

Status, 

and 

Logs

  

7.1  Server > Help: Server Help 

The 

Server Help

 page displays information about the DASDEC II-1EN, EAS, EAS Message Protocol, and EAS Codes.   

7.1.1  About DASDEC II-1EN 

DASDEC II-1EN Emergency Alert System Encoder/Decoder Platform 

Presents information about the installed DASDEC II software and Digital Alert Systems, LLC. The software 
version indicator in the box on the top right side of each page is a hyperlink to the Server Help page.  

7.1.2  About EAS: The Emergency Alert System 

Presents information about the Emergency Alert System: purpose, operation, management, your responsibility 
as a broadcaster, and the future of EAS and DASDEC II.  

7.1.3  EAS Message Protocol 

Presents information about the EAS protocol from the FCC. 

7.1.4  EAS Codes: EAS Code Table 

Presents a list of the EAS event codes which are presently authorized, both national and state. Also displays the 
DASDEC II severity rating with a color code for each code.  

  

7.2  Server > Status: DASDEC II Server Status 

The DASDEC II 

Server Status

 screen has seven sub-tab options: Main, Network, Operating System, USB, CPU, PCI and 

IO.   

7.2.1 Main 

Main Server Status presents a summary of status information about the DASDEC II: Platform ID, System 
Uptime, Decoder and Other Server Status, GPIO Tables, Alert Forwarding Mode, EAS and FIPs codes that will 
auto-forward, Alert Forwarding Action Table, Alert Origination Action Table, Front Panel Button Weekly Test, 
DASDEC II direct VIDEO Output Port, Video Output Duration, audio output, Email, reports, Network Time 
Protocol, Printer, and Disk Usage. Use this page to quickly check the state of the decoder channels and the 
basic encoder and decoder configuration. 
  
The standard link Current Status at the bottom of each DASDEC II page links to this page.   

7.2.2 Network 

Displays the DASDEC II Linux Network and Routing configuration: Links, Routes, Net Status Dump, Firewall Info 
Dump, SSH DSA Public Encryption Key and Authorized Remote SSH DSA Public Encryption Keys.  

Summary of Contents for DASDEC II












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands