DG-VG2300N User
Manual
90
The following table describes the parameters and buttons of this page:
Field
Description
Direction Select
Select the router interface. You can select LAN or WAN. In this example,
LAN is selected.
LAN ACL Switch
Select it to enable or disable ACL function.
IP Address
Enter the IP address of the specified interface. Only the IP address that is in
the same network segment with the IP address of the specified interface can
access the router.
Services Allowed
You can choose the following services from LAN: Web, Telnet, SSH, FTP,
TFTP, SNMP or PING. You can also choose all the services.
Add
After setting the parameters, click it to add an entry to the Current ACL
Table.
Reset
Click it to refresh this page.
Current ACL Table
Displays the services that are added and are active.
Note: DMZ when enabled, the remote access service of the Router web page will be
disabled.
As an alternative, you can use the port forwarding for that IP address/Port. Please
contact technical support for any technical help.
