DG-VG2300N User
Manual
53
The following table describes the parameters and buttons of this page:
Field
Description
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to the destination
device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the Static Route Table.
Update
Select a row in the Static Route Table and modify the parameters. Then
click it to save the settings temporarily.
Delete Selected
Select a row in the Static Route Table and click it to delete the row.
Show Routes
Click it, the IP Route Table appears. You can view a list of destination
routes commonly accessed by your network.
Static Route
Table
A list of the previously configured static IP routes.
Click
Show Routes
, the page shown in the following figure appears. The table shows a list of destination
routes commonly accessed by your network.
