DG-VG2300N User
Manual
18
The following table describes the parameters in this page:
Field
Description
Connection Mode
There are three WAN connection types: PPP over ATM
(PPPoA), PPP over Ethernet (PPPoE) and 1483 Routed. In
this example, the connection type is set to PPPoE.
Encapsulation Mode
You can select LLC/SNAP or VC-Mux. In this example, the
encapsulation mode is set to LLC/SNAP.
IP Protocol
Select the IMP protocol: IPv4, IPv6 or IPv4/IPv6.
802.1q
You can enable or disable 802.1q
VLAN ID (1-4095)
Enter the VLAN ID here. The valid range is 1-4095.
PPP Settings
Enter the username and password.
DNS Settings
Select the DNS settings.
After the settings are done, click
Next
, the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field
Description
WLAN
You can enable or disable the WLAN.
Band
Here select the appropriate band form the list.
SSID
Enter the SSID.
Encryption
Select the encryption from the list.
