Digisol DG-GS1550, Management Manual

Page: 252 / 665

Configuring the Switch
3-206
3
Web – Cli
ck Priority, Traffic Classes.
Select a port or trunk for the current mapping of
CoS values to output queues to be displayed. Assign priorities to the traffic classes
(i.e., output queues), then click Apply.
Figure 3-116 Traffic Classes
CLI – The following example shows how to change the CoS assignments.
* Mapping specific values for CoS priorities is implemented as an interface configuration
command, but any changes will apply to the all interfaces on the switch.
Console(config)#interface ethernet 1/1 4-167
Console(config-if)#queue cos-map 0 0 4-285
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#end
Console#show queue cos-map ethernet 1/1
4-287
Information of Eth 1/1
CoS Value: 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 1 2 2 3 3
Console#