Digisol DG-GS1550, Management Manual

Page: 311 / 665

General Commands
4-11
4
The access mode shown in the following tables is indicated by these abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
GC (Global Configuration)
IC (Interface Configuration)
IPC (IGMP Profile Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
SG (Server Group)
VC (VLAN Database Configuration)
General Commands
These commands are used to control the command access mode, configuration
mode, and other basic functions
Domain Name Service Configures DNS services 4-329
IP Interface Configures IP address for the switch 4-336
Table 4-5 General Commands
Command Function Mode Page
enable Activates privileged mode NE 4-12
disable Returns to normal mode from privileged mode PE 4-12
configure Activates global configuration mode PE 4-13
show history Shows the command history buffer NE, PE 4-13
reload Restarts the system PE 4-14
reload Restarts the system at a specified time, after a specified delay, or
at a periodic interval
GC 4-14
show reload Displays the current reload settings, and the time at which next
scheduled reload will take place
PE 4-16
prompt Customizes the prompt used in PE and NE mode GC 4-16
end Returns to Privileged Exec mode any
config.
mode
4-16
exit Returns to the previous configuration mode, or exits the CLI any 4-17
quit Exits a CLI session NE, PE 4-17
help Shows how to use help any NA
? Shows options for command completion (context sensitive) any NA
Table 4-4 Command Groups (Continued)
Command Group Description Page