Digisol DG-GS1512HP User Manual Download Page 64

Page: 64 / 234

DG-GS1512HP User Manual

Figure 44 - VLAN > VLAN > Membership > Edit Port Setting

Item

Description

Port

Display the interface.

Mode

Display the VLAN mode of interface.

Membership

Select VLANs of left box and select one of following

membership then move to right box to add membership.

Select VLANs of right box then move to left box to remove

membership. Tagging membership may not choose in differ

VLAN port mode. Select the time source.

•

Forbidden: Set VLAN as forbidden VLAN.

•

Excluded: This option is always disabled.

•

Tagged: Set VLAN as tagged VLAN.

•

Untagged: Set VLAN as untagged VLAN.

•

PVID: Check this checkbox to select the VLAN ID to be

the port-based VLAN ID for this port. PVID may auto

select or can

’

t select in differ settings.

Summary of Contents for DG-GS1512HP











































































































































































































































Search results

Summary of Contents for DG-GS1512HP

Reviews:

Related manuals for DG-GS1512HP

Brands by name

Popular brands

Digisol DG-GS1512HP, User Manual

Search results

Summary of Contents for DG-GS1512HP

Reviews:

Related manuals for DG-GS1512HP

Brands by name

Popular brands